Author: Lou Bloomfield

I recently bought a used microwave oven. The enamel coating under the glass turn…

Lou Bloomfield Leave a comment

I recently bought a used microwave oven. The enamel coating under the glass turntable tray is rusted in a ring around the track that the turntable rotates on. Should I repair this or is it ok to just use it as is? — AA, Kettering, Ohio

As long as the oven’s metal bottom is sound underneath the rust, there isn’t a problem. The cooking chamber walls are so thick and highly conducting that they reflect the microwaves extremely well even when they have a little rust on them. However, if the metal is so rusted that it loses most of its conductivity in the rust sites, you’ll get local heating across the rusty patches and eventually leakage of microwaves. If you’re really concerned that there may be trouble, run the microwave oven empty for about 20 seconds and then (carefully!) touch the rusty spots. If they aren’t hot, then the metal underneath is doing its job just fine.

While shopping for a new microwave I was asking the salesperson at a local store…

Lou Bloomfield Leave a comment

While shopping for a new microwave I was asking the salesperson at a local store some questions regarding microwaves. He proceeded to tell me how dangerous they were and that they used to sell some sort of testers to see if the new microwaves they were selling “leaked radiation”. He told me that they all did and that microwaves give off “harmful” radiation. He said that it affects the food that we cook in it and can cause cancer. He said “Think about it, when you get an x-ray the tech covers himself with a lead shield and here we are putting our food into this and there is no lead shield. Needless to say I did not purchase a microwave yesterday, and was wondering if you could please give me some insight on this and tell me is what this salesperson told me is true. Are microwave ovens really harmful? Do they cause cancer? What about the food, does it become toxic. A friend of mine is totally into all organic food and she “unplugged” her microwave years ago and never used it since. She swears it is harmful. Please help. Heating food in a pot is so inconvenient!! — KO

The salesperson you spoke to was simply wrong. If you’ll allow me to stand on my soapbox for a minute, I’ll tell you that this is a perfect example of how important it is for everyone to truly learn basic science while they’re in school and not to simply suffer through the classes as a way to obtain a degree. The salesperson is apparently oblivious to the differences between types of “radiation,” to the short- and long-term effects of those radiations, and to the importance of intensity in radiation.

Let’s start with the differences in types of radiation. Basically, anything that moves is radiation, from visible light, to ultraviolet, to X-rays, to microwaves, to alpha particles, to neutrons, and even to flying pigeons. These different radiations do different things when they hit you, particularly the pigeons. While “ionizing radiations” such as X-rays, ultraviolet, alpha particles, and neutrons usually have enough localized energy to do chemical damage to the molecules they hit, “non-ionizing radiation” such as microwaves and pigeons do not damage molecules. When you and your organic friend worry about toxic changes in food or precancerous changes in your tissue, what really worry you are molecular changes. Microwaves and pigeons don’t cause those sorts of changes. Microwaves effectively heat food or tissue thermally, while pigeons bruise food or tissue on impact.

Wearing a lead apron while working around ionizing radiation makes sense, although a simple layer of fabric or sunscreen is enough to protect you from most ultraviolet. To protect yourself against pigeons, wear a helmet. And to protect yourself against microwaves, use metal. The cooking chamber of the microwave oven is a metal box (including the screened front window). So little microwave “radiation” escapes from this metal box that it’s usually hard to detect, let alone cause a safety problem. There just isn’t much microwave intensity coming from the oven and intensity matters. A little microwaves do nothing at all to you; in fact you emit them yourself!

If you want to detect some serious microwaves, put that microwave detector near your cellphone! The cellphone’s job is to emit microwaves, right next to your ear! Before you give up on microwave ovens, you should probably give up on cellphones. That said, I think the worst danger about cellphones is driving into a pedestrian or a tree while you’re under the influence of the conversation. Basically, non-ionizing radiation such as microwaves is only dangerous if it cooks you. At the intensities emitted by a cellphone next to your ear, it’s possible that some minor cooking is taking place. However, the cancer risk is almost certainly nil.

Despite all this physics reality, salespeople and con artists are still more than happy to sell you protection against the dangers of modern life. I chuckle at the shields people sell to install on your cellphones to reduce their emissions of harmful radiation. The whole point of the cellphone is to emit microwave signals to the receiving tower, so if you shield it you spoil its operation! It would be like wrapping an X-ray machine in a lead box to protect the patient. Sure, the patient would be safe but the X-ray machine would barely work any more.

Returning to the microwave cooking issue, once the food comes out of the microwave oven, there are no lingering effects of its having been cooked with microwaves. There is no convincing evidence of any chemical changes in the food and certain no residual cooking microwaves around in the food. If you’re worried about toxic changes to your food, avoid broiling or grilling. Those high-surface-temperature cooking techniques definitely do chemical damage to the food, making it both tasty and potentially a tiny bit toxic. One of the reasons why food cooked in the microwave oven is so bland is because those chemical changes don’t happen. As a result, microwave ovens are better for reheating than for cooking.

Is it possible to capture and keep ionized gases or air in a container of some s…

Lou Bloomfield Leave a comment

Is it possible to capture and keep ionized gases or air in a container of some sort? That way they could be sprayed out at any time just like room deodorant. — CW

No, you cannot store charged gases in any simple container. If you try to store a mixture of positively and negatively charge gas particles in a single container, those opposite charges will attract and neutralize one another. And if you try to store only one type of charge in a container, those like charges will repel and push one another to the walls of the container. If the container itself conducts electricity, the charges will escape to the outside of the container and from there into the outside world. And if the container is insulating, the charges will stick to its inside surface and you’ll have trouble getting them to leave. Moreover, you’ll have trouble putting large numbers of those like-charged gas particles into the container in the first place because the ones that enter first will repel any like charges that follow.

What packing material protects best? When we drop an egg wrapped in various pack…

Lou Bloomfield Leave a comment

What packing material protects best? When we drop an egg wrapped in various packaging materials, we know the force that gravity exerts on the egg but how do we know the force of the impact? — DL, Springboro, Ohio

I like to view problems like this one in terms of momentum: when it reaches the pavement, a falling egg has a large amount of downward momentum and it must get rid of that downward momentum gracefully enough that it doesn’t break. The whole issue in protecting the egg is in extracting that momentum gracefully.

Momentum is a conserved physical quantity, meaning that it cannot be created or destroyed. It can only be passed from one object to the other. When you let go of the packaged egg and it begins to fall, the downward momentum that gravity transfers into the egg begins to accumulate in the egg. Before you let go, your hand was removing the egg’s downward momentum as fast as gravity was adding it, but now the egg is on its own!

Because momentum is equal to an object’s mass times its velocity, the accumulating downward momentum in the egg is reflected in its increasing downward speed. With each passing second, the egg receives another dose of downward momentum from the earth. By the time the egg reaches the pavement, it’s moving downward fast and has a substantial amount of downward momentum to get rid of. Incidentally, the earth, which has given up this downward momentum, experiences an opposite response—it has acquired an equal amount of upward momentum. However, the earth has such a huge mass that there is no noticeable increase in its upward speed.

To stop, the egg must transfer all of its downward momentum into something else, such as the earth. It can transfer its momentum into the earth by exerting a force on the ground for a certain amount of time. A transfer of momentum, known as an impulse, is the product of a force times a time. To get rid of its momentum, the egg can exert a large force on the ground for a short time or a small force for a long time, or anything in between. If you let it hit the pavement unprotected, the egg will employ a large force for a short time and that will be bad for the egg. After all, the pavement will push back on the egg with an equally strong but oppositely directed force and punch a hole in the egg.

To make the transfer of momentum graceful enough to leave the egg intact, the protective package must prolong the momentum transfer. The longer it takes for the egg to get rid of its downward momentum, the smaller the forces between the egg and the slowing materials. That’s why landing on a soft surface is a good start: it prolongs the momentum transfer and thereby reduces the peak force on the egg.

But there is also the issue of distributing the slowing forces uniformly on the egg. Even a small force can break the egg if it’s exerted only on one tiny spot of the egg. So spreading out the force is important. Probably the best way of distributing the slowing force would be to float the egg in the middle of a fluid that has the same average density as the egg. But various foamy or springy materials will distribute the forces nearly as well.

In summary, (1) you want to bring the egg to a stop over as long as period of time as possible so as to prolong the transfer of momentum and reduce the slowing forces and (2) you want to involve the whole bottom surface of the egg in this transfer of momentum so that the slowing forces are exerted uniformly on the egg’s bottom surface. As for the actual impact force on the egg, you can determine this by dividing the egg’s momentum just before impact (its downward speed times its mass) by the time over which the egg gets rid of its momentum.

Can infrared lasers, thermal cameras, digital cameras, or optical fiber cameras …

Lou Bloomfield Leave a comment

Can infrared lasers, thermal cameras, digital cameras, or optical fiber cameras be used to see through walls of homes or to monitor people’s conversations? — CB, Connecticut

I’m beginning to think that movies and television do a huge disservice to modern society by blurring the distinction between science and fiction. So much of what appears on the big and little screen is just fantasy.

The walls of your home are simply hard to look through. They block visible, infrared, and ultraviolet light nearly perfectly and that doesn’t leave snoopers many good options. A person sitting outside your home with a thermal camera—a device that “sees” the infrared light associated with body-temperature objects—or a digital camera is going to have a nice view of your wall, not you inside. There are materials that, while opaque to visible light, are relatively transparent to infrared light, such as some plastics and fabrics. However, typical wall materials are too thick and too opaque for infrared light to penetrate. Sure, someone can put a camera inside your home and access it via an optical fiber or radio waves, but at that point, they might as well just peer through your window.

The only electromagnetic waves that penetrate walls well are radio waves, microwaves, and X rays. If someone builds an X ray machine around your home, they’ll be able to see you, or at least your bones. Don’t forget to wave. And, in principle, they could use the radar technique to look for you with microwaves, but you’d be a fuzzy blob at best and lost in the jumble of reflections from everything else in your home.

As for using a laser to monitor your conversations from afar, that’s a real possibility. Surfaces vibrate in the presence of sound and it is possible to observe those vibrations via reflected light. But the technical work involved is substantial and it’s probably easier to just put a bug inside the house or on its surface.

Since I first posted this answer, several people have pointed out to me that terahertz radiation also penetrates through some solid surfaces and could be used to see through the walls of homes. In fact, the whole low-frequency end of the electromagnetic spectrum (radio, microwaves, terahertz waves) can penetrate through electrically insulating materials in order to “observe” conducting materials inside a home and the whole high-frequency end of that spectrum (X-rays and gamma rays) can penetrate through simple atoms (low atomic number) in order to “observe” complex atoms inside a home. Still, these approaches to seeing through walls require the viewers to send electromagnetic waves through the house and those waves can be detected by the people inside. They’re also not trivial to implement. I suppose that people could use ambient electromagnetic waves to see what’s happening in a house, but that’s not easy, either. Where there’s a will, there’s a way: stealth aircraft have been detected by way of the dark spot they produce in the ambient radio spectrum and the insides of the pyramids have been studied by looking at cosmic rays passing through them. Nonetheless, I don’t think that many of us need worry about being studied through the walls of our homes.

Why are physicists so skeptical about peoples’ claims to have invented motors th…

Lou Bloomfield Leave a comment

Why are physicists so skeptical about peoples’ claims to have invented motors that provide mechanical power without consuming electric power or generators that produce electric power without consuming mechanical power from the systems that turns them? — LB (Yes, I’m asking myself this question)

While it may seem as though there is some grand conspiracy among physicists to deny validation to those inventors, nothing could be farther from the truth. Physicists generally maintain a healthy skepticism about whatever they hear and are much less susceptible to dogmatic conservativism than one might think. However, physicists think long and deep about the laws that govern the universe, especially about their simplicity and self-consistency. In particular, they learn how even the slightest disagreement between a particular law and the observed behavior of the universe indicates either a problem with that law (typically an oversimplification, but occasionally a complete misunderstanding) or a failure in the observation. The law of energy conservation is a case in point: if it actually failed to work perfect even one time, it would cease to be a meaningful law. The implications for our understanding of the universe would be enormous. Physicists have looked for over a century for a failure of energy conservation and have never found one; not a single one. (Note: relativistic energy conservation involves mass as well as energy, but that doesn’t change the present story.)

The laws of both energy conservation and thermodynamics are essentially mathematical laws—they depend relatively little on the specific details of our universe. Just about the only specific detail that’s important is time-translation symmetry: as far as we can tell, physics doesn’t change with time—physics today is the same as it was yesterday and as it will be tomorrow. That observation leads, amazingly enough, to energy conservation: energy cannot be created or destroy; it can only change forms or be transferred between objects. Together with statistical principals, we can derive thermodynamics without any further reference to the universe itself. And having developed energy conservation and the laws of thermodynamics, the game is over for free-energy motors and generators. They just can’t work. It’s not a matter of looking for one special arrangement that works among millions that don’t. There are exactly zero arrangements that work.

It’s not a matter of my bias, unless you consider my belief that 2 plus 2 equals 4 to be some sort of bias. You can look all you like for a 2 that when added to another 2 gives you a 5, but I don’t expect you to succeed.

About once every month or two, someone contacts me with a new motor that turns for free or a generator that creates power out of nowhere. The pattern always repeats: I send them the sad news that their invention will not work and they respond angrily that I am not listening, that I am biased, and that I am part of the conspiracy. Oh well. There isn’t much else I can do. I suppose I could examine each proposal individually at length to find the flaw, but I just don’t have the time. I’m a volunteer here and this is time away from my family.

Instead, I suggest that any inventor who believes he or she has a free-energy device build that device and demonstrate it openly for the physics community. Take it to an American Physical Society conference and present it there. Let everyone in the audience examine it closely. Since anyone can join the APS and any APS member can talk at any major APS conference, there is plenty of opportunity. If someone succeeds in convincing the physics community that they have a true free-energy machine, more power to them (no pun intended). But given the absence of any observed failure of time-translation symmetry, and therefore the steadfast endurance of energy conservation laws, I don’t expect any successful devices.

My 10-year old son understands that body temperature is related to the speeds/ki…

Lou Bloomfield Leave a comment

My 10-year old son understands that body temperature is related to the speeds/kinetic energies of the molecules inside you, but does friction play a role as well? — MR

You’re both right about temperature being associated with kinetic energy in molecules: the more kinetic energy each molecule has, the hotter the substance (e.g. a person) is. But not all kinetic energy “counts” in establishing temperature. Only the disordered kinetic energy, the tiny chucks of kinetic energy that belong to individual particles in a material contributes to that material’s temperature. Ordered kinetic energy, such as the energy in a whole person who’s running, is not involved in temperature. Whether an ice cube is sitting still on a table or flying through the air makes no difference to its temperature. It’s still quite cold.

Friction’s role with respect to temperature is in raising that temperature. Friction is a great disorderer. If a person running down the track falls and skids along the ground, friction will turn that person’s ordered kinetic energy into disordered kinetic energy and the person will get slightly hotter. No energy was created or destroyed in the fall and skid, but lots of formerly orderly kinetic energy became disordered kinetic energy—what I often call “thermal kinetic energy.”

The overall story is naturally a bit more complicated, but the basic idea here is correct. Once energy is in the form of thermal kinetic energy, it’s stuck… like a glass vase that has been dropped and shattered into countless pieces, thermal kinetic energy can’t be entirely reconstituted into orderly kinetic energy. Once energy has been distributed to all the individual molecules and atoms, getting them all to return their chunks of thermal kinetic energy is hopeless. Friction, even at the molecular level, isn’t important at this point because the energy has already been fragmented and the most that any type of friction can do is pass that fragmented energy about between particles. So friction creates thermal kinetic energy (out of ordered energies of various types)… in effect, it makes things hot. It doesn’t keep them hot; they do that all by themselves.

If you have a deck that is snow covered with a very light, fluffy snow, and no o…

Lou Bloomfield Leave a comment

If you have a deck that is snow covered with a very light, fluffy snow, and no one touches it, but in the next few days, from the sun, or whatever, the snow becomes “heavier” to move, does it actually weigh more? — PP

As the snow settles and becomes denser, it may feel “heavier”, but its total weight doesn’t change much. The same water molecules are simply packing themselves into a smaller space. So while each shovel-full of the dense stuff really does weigh more than a shovel-full of the light stuff, the total number of water molecules present on your deck and their associated weight is still the same.

In actually, some of the water molecules have almost certainly left via a form of solid-to-gas evaporation known technically as “sublimation.” You have seen this conversion of ice into gas when you have noticed that old ice cubes in your freezer are smaller than they used to be or when you see that the snow outside during a cold spell seems to vanish gradually without ever melting. Sublimation is also the cause of “freezer burn” for frozen foods left without proper wrapping.

I don’t want to sound like I know everything in the world or even like I know qu…

Lou Bloomfield Leave a comment

I don’t want to sound like I know everything in the world or even like I know quite a lot. But you had a question regarding “If a microwave oven door were to open while it was still on, what would happen? Could it hurt you?- JP”

Well ..Having the thought process that I have, kinda how should I put it? …Stupid? or inventive or even in-between. Well, my microwave door did happen to come off. Magic Chef 900-watt microwave. Well, I did my best to try to fix it but the hinge on one side did not attach properly, therefore having a gap between the door and the appliance. Being me (stupid) I wondered if it would burn fast or would it gradually warm up. I slid my finger between…You probably dying to hear what happened… But it didn’t gradually warm up at all. It was instant heat! It didn’t scar me or anything like that, but sure scared the H*** out of me to find out it got so hot so quick. I didn’t get any blisters either. But it just burned like touching something hot on the tip of my finger being that is the only thing I put in. Well you know the old adage, “You learn from your mistakes”, stands true. lol – Anonymous

What a remarkable story! As much as I like to think I can predict what should happen in many cases, there is just nothing like a good experiment to bring some reality to the situation. Your microwave evidently sent a significant fraction of its 900 watts of microwave radiation through that crack between cooking chamber and door and roasted your finger instantly. This is a good cautionary tale for those who are careless or curious with potentially dangerous household gadgets. While I continue to think that serious injuries are unlikely even in a leaky microwave oven, you have shown that there are cases of real danger. Fortunately, you had time to snap you finger away. It’s like Class 3 lasers, which are now common in the form of laser pointers and supermarket checkout systems: they can damage your vision if you stare into them, but your blink reflex is fast enough to keep you from suffering injury. Thanks for the anecdote and I’m glad your finger recovered.

Ever since someone struck and damaged the rear bumper of my SAAB 9-3, the air pr…

Lou Bloomfield Leave a comment

Ever since someone struck and damaged the rear bumper of my SAAB 9-3, the air pressure inside the car has been unbearable to myself and passengers. It causes ear pain and nausea after around 15 minutes of driving. The only solution is to open the windows. Can you think of any structural aspect that may cause a problem like this? – TA

I suspect that the air inside the car is vibrating the way it does inside an organ pipe or in a soda bottle when you blow carefully across the bottle’s lip. This resonant effect is common in cars when one rear passenger window is opened slightly. In that case, air blowing across the opening in the window is easily deflected into or out of the opening and drives the air in the passenger compartment into vigorous vibration. In short, the car is acting like a giant whistle and because of its enormous size, its pitch is too low for you to hear. Instead, you feel the vibration as a sickening pulsation in the air pressure.

For the one-open-window problem, the solution is simple: open another window. That shifts the resonant frequency of the car’s air and also helps to dampen the vibrations. Alternatively, you can close the opened window. In your case, the resonance appears to involve a less visible opening into the car, perhaps near the rear bumper. If you can close that leak, you may be able to stop the airflow from driving the air in the car into resonance. If you are unable to find the leak, your best bet is to do exactly what you’ve done: open another window.