How can the magnets be manipulated in such a way that they can do this moving of…

Lou Bloomfield Leave a comment

How can the magnets be manipulated in such a way that they can do this moving of the electron beam in such an incredibly small amount of time?

The electromagnets that control the beam are able to turn on and off very quickly. The only limit on the rate at which they can change the magnetic field comes from their inductance. They do resist changes in current passing through them. Fortunately, the television doesn’t move the beam about randomly; it sweeps the beam smoothly. Thus the changes in the current through the electromagnetic coils are also smooth. The television has no trouble ramping the field through the horizontal sweep coils back and forth every 1/15,750th of a second.

How can computer monitors and televisions have images burnt into them over time?

Lou Bloomfield Leave a comment

How can computer monitors and televisions have images burnt into them over time?

As the electron beam collides with the phosphor coating on the inside of the picture tube, it slowly damages that phosphor coating. Eventually the phosphors are burnt away and the inside surface of the picture tube stops being uniform. To avoid burning specific regions more than others, computers use screen savers that darken the images by turning down the electron beam and keep those images moving about randomly.

Why do radio waves travel better at night?

Lou Bloomfield Leave a comment

Why do radio waves travel better at night?

AM radio waves travel remarkably long distances near dusk because of the behavior of the earth’s atmosphere. A layer in the upper atmosphere, the ionosphere, contains many electrically charged particles and it behaves like a poor electrical conductor. Its conductivity improves in the early evening. When low frequency radio waves encounter this conducting layer, it responds to them and reflects them just like a mirror reflects light. As a result, you can hear very distant radio stations as their waves bounce of the ionosphere. FM transmissions occur at high frequencies that are too fast for the ionosphere to reflect.

Where does the charge on the antenna come from?

Lou Bloomfield Leave a comment

Where does the charge on the antenna come from?

In the transmitting station, the moving charge is pumped back and forth between the ground and the antenna. The net charge in the vicinity of the station remains zero, but it is constantly being redistributed. Sometimes the antenna is positively charged and the ground is negatively charged and sometimes it’s the reverse. In the receiving station, the same may be true. But there are also hand-held receivers that do not touch the ground. In that case, the receiver is still neutral, but charge is being pushed back and forth along the antenna and tank so that when the antenna is positively charged, the bottom of the tank circuit itself is negatively charged.

When a station transmits a signal, do all receiving antennae have the same recip…

Lou Bloomfield Leave a comment

When a station transmits a signal, do all receiving antennae have the same reciprocal charge?

Yes. The transmitting antenna pushes huge amounts of charge up and down so that all of the receiving antennae respond primarily to it rather than to one another. However when many receiving antennae are very near one another, they can begin to cause trouble. In effect, each antenna draws a small amount of energy out of the radio wave. If there are too many nearby antennas, they will sap the radio wave’s energy and each receiving antenna will get less than its normal amount. The other way to look at this effect is to realize that the receiving antennas actually retransmit the radio wave that they receive, but upside down. They weaken the wave as a result. If there are too many antennas around, they will reduce the wave to almost nothing.

What is the difference between an electric and a magnetic field?

Lou Bloomfield Leave a comment

What is the difference between an electric and a magnetic field?

An electric field exerts forces on electric charges while a magnetic field exerts forces on magnetic poles. If you place a positive electric charge in an upward-pointing electric field, that electric charge will accelerate upward (in the direction of the electric field). But if you place a stationary north magnetic pole (if you could find one) in that same electric field, nothing will happen. An electric field exerts no force on a stationary magnetic pole. On the other hand, if you place a north magnetic pole in an upward-pointing magnetic field, that pole will accelerate upward (in the direction of the magnetic field). But if you place a stationary positive electric charge in that same magnetic field, nothing will happen. So electric fields act on stationary electric charges and magnetic fields act on stationary magnetic poles.

Occasionally my receiver will pick up two stations at the same time, fading in a…

Lou Bloomfield Leave a comment

Occasionally my receiver will pick up two stations at the same time, fading in and out and fighting to be heard. How is this possible?

In AM radio, the sound is encoded as the strength of the radio wave. If two transmitters are using the same frequency (or your receiver cannot distinguish between them due to its limited resolution), then it will responds to both of them at once. The sound that you hear will be the sum of them both, as though they were two musical instruments in the same room. In FM radio, the sound is encoded as the exact frequency of the radio wave. In this case, your receiver is likely to follow the strongest of the two stations and flip in between occasionally when their strengths change (due to weather or reflections from moving objects). Thus it is common for AM radio receivers to superpose two stations but not so common for FM radio receivers to do the same trick.

If electric and magnetic field are forever recreating one another – in radio wav…

Lou Bloomfield Leave a comment

If electric and magnetic field are forever recreating one another – in radio waves – how do you change the sounds they produce?

Within each portion of the wave, the local electric and magnetic fields endlessly recreate one another. But this portion of the wave heads outward from the transmitting antenna at the speed of light and is soon far away from the earth. As the transmitter changes the amount of charge on the antenna or its frequency of motion up and down, it creates new portions of the wave that may differ from the portions sent out a minute ago, a second ago, or even a few millionths of a second ago. Thus the transmitter’s changes very quickly pass outward to all of the receivers nearby. The farther you are from the transmitter, the longer it takes for the various patterns in the wave to reach you and your receiver. All of the music transmitted by radio stations in the 50’s is still traveling outward because the patterns emitted back then continue to travel. They are now 40 or 50 light years away from the earth and are so widely dispersed across space that it would take a phenomenally sensitive receiver to detect them. But they are out there nonetheless. Many of the searches for extraterrestrial intelligence have focused on trying to detect this sort of radio transmission across the depths of space. If other peoples have invented radio, they are quite likely to have chosen AM or FM modulation as their encoding schemes, too.

How is the charge moving in the waves related to what is actually played on the …

Lou Bloomfield Leave a comment

How is the charge moving in the waves related to what is actually played on the radio?

First, there isn’t any charge moving in the waves themselves. The waves contain only electric and magnetic fields. These fields will push on any electric charges or magnetic poles they encounter, but they are not themselves electrically charges or magnetically poled. The amount of fields in a radio used for audio transmission depend on the station’s transmitting power and on the encoding format for the music. In AM (Amplitude Modulation) encoding, the music is encoded as the strength of the radio waves. Each time the radio wave’s strength goes up and down once, the speaker cone in your receiver goes forward and backward once. In FM (Frequency Modulation) encoding, the radio wave’s strength remains steady but its precise frequency changes slightly. Each time the radio wave’s frequency goes up and down once, the speaker cone in your receiver goes forward and backward once.

How is charge distributed to a tank circuit with the “correct” frequency?

Lou Bloomfield Leave a comment

How is charge distributed to a tank circuit with the “correct” frequency?

The transmitting station has an electrical oscillator, an electronic system that experiences periodic reversals of current. This oscillator contains a tank circuit or some other clock-like system that acts as a timekeeper. With the help of its timekeeper, the oscillator causes the transmitting station to send current to the main antenna tank circuit at just the right moments to sustain and enhance the sloshing current there. The oscillator and the current sloshing in the tank circuit remain in perfect synchrony with one another. One of the best clock-like systems is a quartz crystal oscillator, like that in a typical wristwatch. In a quartz oscillator, a quartz crystal vibrates like the bar of a xylophone. In a watch, these vibrations are used to control a digital clock system so that it keeps accurate time. In a transmitter, these vibrations are used to control the distribution of current to the tank circuit at the antenna.