I have a digital camera and when I put an IR remote control in front of the lens and press a button, a bluish white light is visible on the camera’s monitor. Why is that? — MC
What a neat observation! Digital cameras based on CCD imaging chips are sensitive to infrared light. Even though you can’t see the infrared light streaming out of the remote control when you push its buttons, the camera’s chip can. This behavior is typical of semiconductor light sensors such as photodiodes and phototransistors: they often detect near infrared light even better than visible light. In fact, a semiconductor infrared sensor is exactly what your television set uses to collect instructions from the remote control.
The color filters that the camera employs to obtain color information misbehave when they’re dealing with infrared light and so the camera is fooled into thinking that it’s viewing white light. That’s why your camera shows a white spot where the remote’s infrared source is located.
I just tried taking some pictures through infrared filters, glass plates that block visible light completely, and my digital camera worked just fine. The images were as sharp and clear as usual, although the colors were odd. I had to use incandescent illumination because fluorescent light doesn’t contain enough infrared. It would be easy to take pictures in complete darkness if you just illuminated a scene with bright infrared sources. No doubt there are “spy” cameras that do exactly that.