What exactly are angular speed and angular velocity?

Lou Bloomfield Leave a comment

What exactly are angular speed and angular velocity?

Angular speed is the measure of how quickly an object is turning. For example, an object that is spinning once each second has an angular speed of “1 rotation-per-second,” or equivalently “360 degrees-per-second.” Angular velocity is a combination of angular speed and the direction of the rotation. For example, a clock lying on its back and facing upward has a minute hand with an angular velocity of “1 rotation-per-hour in the downward direction.” The downward direction reflects the fact that the minute hand pivots about a vertical axis and that your right hand thumb would point downward if you were to curl your fingers in the direction of the minute hand’s rotation.

Shouldn’t the seesaw be completely horizontal in order to be balanced? How can i…

Lou Bloomfield Leave a comment

Shouldn’t the seesaw be completely horizontal in order to be balanced? How can it be balanced if it’s not horizontal?

A balanced seesaw is simply one that isn’t experiencing any torque—the net torque on it is zero. Because there is no torque on it, it isn’t undergoing any angular acceleration and its angular velocity is constant. If it happens to be horizontal and motionless, then it will stay that way. But it could also be tilted or even rotating at a steady rate.

Is moment of inertia determined only by mass, as inertia is in translational mot…

Lou Bloomfield Leave a comment

Is moment of inertia determined only by mass, as inertia is in translational motion?

No, moment of inertia embodies both mass and its distribution about the axis of rotation. The more of the mass that is located far from the axis of rotation, the larger the moment of inertia. For example, a ball of dough is much easier to spin than a disk-shaped pizza, because the latter has its mass far from the axis of rotation.

How can cats turn their bodies around to land on their feet if they fall and how…

Lou Bloomfield Leave a comment

How can cats turn their bodies around to land on their feet if they fall and how can people do tricks in the air when they are skydiving if you’re supposed to “keep doing what you’ve been doing” when you leave the ground?

Cats manage to twist themselves around by exerting torques within their own bodies. They aren’t rigid, so that one half of the cat can exert a torque on the other half and vice versa. Even though the overall cat doesn’t change its rotation, parts of the cat change their individual rotations and the cat manages to reorient itself. It goes from not rotating but upside down to not rotating but right side up. Overall, it never had any angular velocity. As for skydiving, that is mostly a matter of torques from the air. As you fall, the air pushes on you and can exert torques on you about your center of mass. The result is rotation.

Given a lever long enough, could you move the world?

Lou Bloomfield Leave a comment

Given a lever long enough, could you move the world?

Yes. Of course, you would need a fixed pivot about which to work and that might be hard to find. But you could do work on the world with your lever. If the arm you were dealing with was long enough, you could do that work with a small force exerted over a very, very long distance. The lever would then do this work on the world with a very, very large force exerted over a small distance.

Can you give me an example of when the angular acceleration is in a different di…

Lou Bloomfield Leave a comment

Can you give me an example of when the angular acceleration is in a different direction from the torque applied?

When an object isn’t symmetric, it can rotate in very peculiar ways. If you throw a tennis racket into the air so that it is spinning about an axis that isn’t along the handle or at right angles to the handle, it will wobble in flight. Its axis of rotation will actually change with time as it wobbles. If you were to exert a torque on this wobbling tennis racket, its angular acceleration wouldn’t necessarily be along the direction of the torque.

Why doesn’t an egg break when it falls into a pile of feathers? Isn’t the pile o…

Lou Bloomfield Leave a comment

Why doesn’t an egg break when it falls into a pile of feathers? Isn’t the pile of feathers exerting the same force on it (perhaps 1000 newtons) that a table would if it were to hit that table?

The egg doesn’t break because the feathers exert a much smaller force on the egg than the table would. The feathers can move so when the egg first hits them, the feathers don’t have to stop the egg so quickly. To keep the egg from penetrating into the table, the table has to stop the egg’s descent in about a thousandth of a second. That required a huge upward force on the egg of perhaps 1000 N. This large upward force, exerted on one small point of the egg, breaks the egg. But when the egg hits the feathers, the feathers can stop the egg’s descent leisurely in about a tenth of a second. They only have to push upward on the egg with a smaller force of perhaps 10 N. This modest force, exerted on many points of the egg, shouldn’t break the egg. During this tenth of a second, the feathers and the egg will both move downward and the egg will come to a stop well below the place at which it first touched the feathers.

When you push up on an object, are you creating thermal energy or does that only…

Lou Bloomfield Leave a comment

When you push up on an object, are you creating thermal energy or does that only occur when something does work on you?

When you lift a heavy object, you do work on that object. After all, you exert an upward force on it and it moves in the direction of that force. However your muscles are inefficient and you consume more food energy (calories) during the lifting process than you actually transfer to the heavy object. Whatever energy you consume that doesn’t go into the object remains in you as thermal energy. Any time you tighten your muscles, whether you do work on something, it does work on you, or neither does work on the other, you end up wasting some food energy as thermal energy.

When you drop a glass on a hard floor, why does it sometimes break and sometimes…

Lou Bloomfield Leave a comment

When you drop a glass on a hard floor, why does it sometimes break and sometimes not?

When the glass hits the floor, the floor exerts all of its force on the part of the glass that actually touches the floor. That small part of the glass accelerates upward quickly and comes to rest. The remainder of the glass isn’t supported by the floor and continues downward. However the glass is relatively rigid and parts of it begin to exert forces on one another in order to stop the whole glass from bending. These internal forces can be enormous and they can rip the glass apart. Glass is a remarkable material; it never dents, it only breaks. As the glass tries to come to a stop, the internal forces may bend it significantly. It will either tolerate those bends and later return to its original shape or it will tear into pieces. Which of the two will occur depends critically on the precise locations and amounts of the forces. If the forces act on a defect on the glass’s surface, it will crack and tear and the glass is history. If the forces all act on strong parts of the glass, it may survive without damage.

When a person bumps into something or has something dropped on them and a bruise…

Lou Bloomfield Leave a comment

When a person bumps into something or has something dropped on them and a bruise forms, does it form because of the object hitting the person or from the person exerting a force on the object to keep that object from pass through their skin?

The bruise forms because of the force exerted on the person by the object. When an object hits you, it’s obvious that the object pushes on you. But the object also pushes on you when you hit it. In fact, it’s a matter of perspective which is hitting which. To a person standing next to you when you’re hit by a ball, the ball hit you. To a person running along with the ball, you hit the ball. In each case, the ball pushes on you and gives you a bruise. You also push on the ball, causing it to accelerate away from you.